Page 1 of 1
1999 2.5 AUTO SEATING CHANGE
Posted: Sun Sep 19, 2021 11:37 am
by BongoBrighton236
My T reg has just the single bench seat in rear.
My question is
Can i turn it round to face forward. As its currantly facing rear
I have a well kitted tool box
Thanks in advance
Jon Brighton
Re: 1999 2.5 AUTO SEATING CHANGE
Posted: Sun Sep 19, 2021 1:24 pm
by g8dhe
If it runs and locks on the runners then you will also have to rotate the runners around as well as changing the seat orientation. If its locked in position then turning it around, it will then run and lock on the existing runners.
Re: 1999 2.5 AUTO SEATING CHANGE
Posted: Sun Sep 19, 2021 5:53 pm
by BongoBrighton236
Yes it does and did .
Thanks for advice
Now facing forward and locking where needed etc.
45 min job start to finish
Thanks all
Re: 1999 2.5 AUTO SEATING CHANGE
Posted: Mon Sep 20, 2021 2:47 pm
by oibaf
Sounds like success for you there but, just in case, this video I did should be useful for anyone with a rear conversion:
https://youtu.be/nhsmbl3INkE