Yes they will fit, but you will need different tyres with the right load ratings.
I have a set of RX8 17 inch wheels on mine.

small update... Fitted BMW electric window switch to the n/s and need to work on the o/s now. http://i47.photobucket.com/albums/f192/puma931/IMG_23301_zpszzduuziw.jpg VW splitter has been fitted and secure in place with ss screws and ss bolts. The front now looks good with the red pin stripe. http:/...

As it is so difficult to roller paint around/behind the side windows, I have decided to rattle can some red which will follow the lines of the van, from the line below the mirror, to the small curve at the top of the front wing, up and along the gutter and down the line on the rear side window back ...

I had a good look and could not see the spring or filter. I will check again before I fit the new items.

Gasy wrote:You sure it's not in there I had to tape 2 cotton buds together to reach mine

Thanks Simon, It comes with the spring :-) "Also known as the "banjo filter", this OEM part comes with the integral spring. For diesel Bongos." Filter can be bought from club shop http://www.igmaynard.co.uk/bongo/merchandise3.htm#Filters and spring could be bought from practicall...

Hi,

Does anyone know where I can buy the spring and filter from, as my 98 Diesel does not have them?

I think the problem is with the engine, as on a 170 mile trip it started to loose power (doing 70+) and at one stage (after 100 miles) cut out at 50mph. After a while it restarted and ran fine at 55mph. It only seems to attempt to stall after a brisk drive on the motorway. After some research I thin...

I have a set that I took off my can.
Let me know if you want them.

Quick question... I bought this controller, but should you disconnect the solar panel from the controller when not in use, as the batter indicator is flashing (indicating fully charged)? Thanks Mathew Hi Mark, Which one did you go for 10, 20, 30 or 40 Amp? Cheers Mathew I had a failure on the same t...

Almost finished my rear cupboard above the cooker/sink unit
Also cooked my first bacon cobb (I was in Derbyshire)

This is the one I went for:
http://www.woolies-trim.co.uk/p-1606-fl ... -seal.aspx

Puma931 wrote:No, you need a rubber tube on the edge to form a seal.

Gasy wrote:Is this any good for a new roof seal £3:50 per meter
Eblay 131061093518

Still working on mine as I'm going to add a red pin stripe around the matt black area around the fog lights and I still need to fit DLR in the spaces next to the number plate.

sprayed a bit of matt black on the bumper and fitted my 2nd hand fog lights. Just need to add a red pin stripe now.

Hi Mark, Which one did you go for 10, 20, 30 or 40 Amp? Cheers Mathew I had a failure on the same type. Replaced it with one of these http://www.ebay.co.uk/itm/10A-20A-30A-40A-MPPT-Solar-panel-Charger-Regulator-controller-12-24V-AUTO-/380995554837?pt=LH_DefaultDomain_3&var=&hash=item58b51ace...

No, you need a rubber tube on the edge to form a seal.

Gasy wrote:Is this any good for a new roof seal £3:50 per meter
Eblay 131061093518