rear spoiler brake light

ford tinny · Post by **ford tinny** » Sat Oct 27, 2007 9:20 pm

Hello, the brake light on my rear spoiler isn't working, so on closer inspection i found that it isn't plugged in---- there is no other wires lurking about, so i must presume that the spoiler wasn't wired up when fitted. Does anyone know how to wire this up PLEASE!!!!!
Thanks John (Ford Tinny)

daveblueozzie · Post by **daveblueozzie** » Sat Oct 27, 2007 9:28 pm

Just take two wires from the light ,one to earth and one to the brake light cluster.just find which wire is the brake light, then connect it up.

ford tinny · Post by **ford tinny** » Sat Oct 27, 2007 9:35 pm

Thanks, I thought it would be simlple but just wanted some backing up
Thanks John (ford tinny)

MountainGoat · Post by **MountainGoat** » Sat Oct 27, 2007 9:43 pm

Have PM'd you with a bit of info that may be useful.

Gaza69 · Post by **Gaza69** » Tue Oct 30, 2007 10:51 pm

This is my first post, tehee

When i got my Bongo 4 months ago i to noticed the tail light wasnt working, but on top of that the rear speakers although wired Weren’t working either. So as i was trying to fix the rear speakers i found under the rear drivers side side cubby box thing, 2 wires not connecting, strangley these fixed the tail lights problem, but unfortunatly not the speakers.

so have put that to the bottom of "to do list". ha have that for a first one, hehe

francophile1947 · Post by **francophile1947** » Tue Oct 30, 2007 10:57 pm

Welcome to the forum.
You may actually find that one rear speaker is working - that's because lots of Bongos only have one fitted on the passenger side.

Gaza69 · Post by **Gaza69** » Wed Oct 31, 2007 10:20 pm

Well When i picked up the bongo before i had the conversion all the speakers were working, but strangely afterwards none of them was working. After scratching my head for a LONG while i unplugged the back speakers and Aha the front speakers now work?? any ideas? i just pressume that in the process of the conversion going in they must have gone through a wire?? P.S Might sound really dumb but i want a pic on my name thing on the left how do i upload?

francophile1947 · Post by **francophile1947** » Wed Oct 31, 2007 11:11 pm

Gaza69 wrote:Well When i picked up the bongo before i had the conversion all the speakers were working, but strangely afterwards none of them was working. After scratching my head for a LONG while i unplugged the back speakers and Aha the front speakers now work?? any ideas? i just pressume that in the process of the conversion going in they must have gone through a wire?? P.S Might sound really dumb but i want a pic on my name thing on the left how do i upload?

Follow these instructions from the Guidance Section - http://www.igmaynard.co.uk/bongo/forum/ ... php?t=9435

mister munkey · Post by **mister munkey** » Wed Oct 31, 2007 11:13 pm

Welcome Gazza

http://www.igmaynard.co.uk/bongo/forum/ ... hp?t=12640

Will point you in the right direction, only takes a few mins.

Regards,

rear spoiler brake light

rear spoiler brake light

rear spoiler brakelight

No Tail Light