EGR blanking.

brookie · Post by **brookie** » Wed Nov 07, 2007 2:17 pm

After blocking the EGR inlet on the inlet manifold, is there anything else that requires blanking, or is that enough to do the job?

Thanks guys

francophile1947 · Post by **francophile1947** » Wed Nov 07, 2007 3:16 pm

That's all I've done, but you can get pukka blanking plates and plugs to enable you to remove the whole thing - this makes it a lot easier to do glowplugs etc.

brookie · Post by **brookie** » Wed Nov 07, 2007 5:16 pm

Thanks John, I've blocked the intake with a plate I've made out of 2mm steel, fits a treat, so hopefully a smoke reduction! I think I'll leave it at that !