Technical questions and answers about the Mazda Bongo
Moderators: Doone, westonwarrior
-
flippa
Post
by flippa » Thu Nov 29, 2007 11:37 pm
-
flippa
Post
by flippa » Thu Nov 29, 2007 11:49 pm
shocked to find this today ....maybe the culprit of my coolant loss its right through to the thread ...scary its been on
http://s240.photobucket.com/albums/ff13 ... 9c8c45.jpg new maximum three months ...note to all when fitting hoses silicone or rubber ...make sure they are not touching any moving part........i could'nt make it up
-
mikeonb4c
- Supreme Being
- Posts: 22877
- Joined: Sun Nov 05, 2006 10:49 pm
- Location: Living with Mango Bongo in the North West but with a tendency to roam
-
Contact:
Post
by mikeonb4c » Fri Nov 30, 2007 12:06 am
Which hose is that flippa 'cos I'll check mine out ASAP

-
cheffy34
- Supreme Being
- Posts: 1369
- Joined: Thu Aug 30, 2007 4:17 pm
- Location: Planet earth "mostly"
Post
by cheffy34 » Fri Nov 30, 2007 12:08 am
Maybe a stupid question but are the hoses the same on the petrol v6, if so i may be interested aswell.
-
daveblueozzie
- Supreme Being
- Posts: 5922
- Joined: Tue Feb 20, 2007 9:25 pm
- Location: North West.
Post
by daveblueozzie » Fri Nov 30, 2007 12:34 am
Hi flippa how long do you think it wil take to change a set of hoses ?
Lost without my Bongo.
-
flippa
Post
by flippa » Fri Nov 30, 2007 12:38 am
mike the hose is therm to metal pipe passengers side.......if thats the driveshaft under there then that was what it was rubbing against .....nasty....3 months old max

-
flippa
Post
by flippa » Fri Nov 30, 2007 12:40 am
well i was 2 hours into it ....till the light beat me .....that was with a few cuppas and a few roll ups mind

.........plus piccies....plus the shock of that hose
some are easy some ...if original can be buggers to remove

-
flippa
Post
by flippa » Fri Nov 30, 2007 12:44 am
i will have to check the v6 coolant hose schematic cheffy
-
mikeonb4c
- Supreme Being
- Posts: 22877
- Joined: Sun Nov 05, 2006 10:49 pm
- Location: Living with Mango Bongo in the North West but with a tendency to roam
-
Contact:
Post
by mikeonb4c » Fri Nov 30, 2007 12:50 am
Thanks for that flippa - keep going!

-
flippa
Post
by flippa » Fri Nov 30, 2007 1:00 am
i can't go anywhere mike ...me bongo's got no coolant in it

-
Socket Set Sue
Post
by Socket Set Sue » Fri Nov 30, 2007 1:05 am
Good set of photos there Flippa, all the main hoses seem to be covered - so can I ask Santa to send me set yet?
Blue preferably but any will do, even mixed colours - after all its the hoses that matter in the long run, not the colour.
-
flippa
Post
by flippa » Fri Nov 30, 2007 1:18 am
tis true sue i chose the red ....as i got loads and no -one seems ta want them

....can't mix em up though ......there are plenty of blue sets......and whilst i wont be donning my santas outfit ...i will wrap em in crimbo paper if you like

-
brorabongo
- Supreme Being
- Posts: 3226
- Joined: Wed Jan 17, 2007 5:56 pm
- Location: Brora, Sutherland
Post
by brorabongo » Fri Nov 30, 2007 1:41 am

You would think Red would be popular, as it's a good visual warning when that the hoses could be HOT.
Do you think Red "sticks-out" more, compared to Blue or Black?
ボンゴの激怒 pictures
Run your fingers over my Bongo, and I'll run my Bongo over your fingers!!

-
flippa
Post
by flippa » Fri Nov 30, 2007 2:02 am
agreed brora i had a choice ....and the red seemed the most standoutish if you like...think im going to be lumbered with the black

-
Raff
Post
by Raff » Fri Nov 30, 2007 12:58 pm
Any colour so long as they work !!!!!! but I do like the Red idea
