silicone flippa

cheffy34 · Post by **cheffy34** » Thu Jan 24, 2008 11:38 pm

Yeh come on flip im still waiting for you to sort out the missing v6 ones

flippa · Post by **flippa** » Thu Jan 24, 2008 11:53 pm

hmm

them little metal pipes do worry me but i guess they gotta be in metal? as for the bigger bore metal i.e between engine and rad that would be an awful long run for a single pipe each side .....im ordering some rolls of smaller id hose and see what it can replace without been any special shape......cheffy gimme a chance mate i havnt even driven the v6 yet well only to and fro the mot

...as for taking it apart hmm i wonder does anyone know of a substance jelly like that would set inside a hose in order to take a mould ....but then i suppose id have to cut the hose to get it out

John the sparky · Post by **John the sparky** » Fri Jan 25, 2008 12:12 am

I know of one jelly like substance............

JELLY

I'll get my coat!

John

cheffy34 · Post by **cheffy34** » Fri Jan 25, 2008 12:26 am

John the sparky wrote:I know of one jelly like substance............

JELLY

I'll get my coat!

John

Maybe you should consult your quack about that issue john

flippa · Post by **flippa** » Fri Jan 25, 2008 1:20 am

..any particular flavour john

papa joe · Post by **papa joe** » Fri Jan 25, 2008 8:26 am

Hello flippa

Not sure if it's my 'puter, but had e-mail returned from the e-mail address
you supplied ( basically saying not known)

Have tried again AND sent a pm.

If you dont get either, please could you pm me with a contact number.

Get there sooner or later !

Cheers pj.

flippa · Post by **flippa** » Fri Jan 25, 2008 12:02 pm

no problem pj i got your mail

...it was probably the dodgy link i supplied

Post by **Ian** » Fri Jan 25, 2008 12:11 pm

If there are any further supply problems regarding the jubilee clips, John Matthews has been in touch to inform me that a full range can be obtained from Namrick Ltd of Hove. 01273-779864. http://www.namrick.co.uk

bigdaddycain · Post by **bigdaddycain** » Sat Jan 26, 2008 7:34 pm

Thanks Ian, that reminds me,i purchased the last 2 sets of clips from manflex today. I phoned the order in with my number witheld to test em, i spoke to mick,and he knew exactly what a mazda bongo clip set was straight away.... ( he passed the test

)

The new stock will be replenished by the middle of next week, i think they are suprised by the amount of calls they are taking regarding them!

( i did warn em!)

http://www.manflex.co.uk/contact.php

flippa · Post by **flippa** » Sat Jan 26, 2008 11:11 pm

Thats a nice little link ian for bits and bobs very handy

....

sold out bdc

.... $\:D/$ you mean ta say ? theres been a run on jubilee clips

bigdaddycain · Post by **bigdaddycain** » Sat Jan 26, 2008 11:18 pm

Yip... 18-20 in a kit. (as you already know flippa) They are under the impression that owners of an imported campervan type thingy suddenly seem to be buying them in large quantities...

John the sparky · Post by **John the sparky** » Sat Jan 26, 2008 11:19 pm

LIME!

flippa · Post by **flippa** » Sat Jan 26, 2008 11:26 pm

wobble wobble john

John the sparky · Post by **John the sparky** » Sun Jan 27, 2008 8:20 am

cheffy34 · Post by **cheffy34** » Sun Feb 03, 2008 12:26 am

Hey guys n gals has anyone fitted silacone hoses to ther v6 yet, i want to but im pretty sure a couple are different or am i wrong

Will the ones for the diesal fit where appropriate

if they do what chances of yellow ones pleaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaase