HELP: Correct LED bulbs for front cab interior light
Moderators: Doone, westonwarrior
- brorabongo
- Supreme Being
- Posts: 3226
- Joined: Wed Jan 17, 2007 5:56 pm
- Location: Brora, Sutherland
-
mr and mrs pips
- Bongolier
- Posts: 215
- Joined: Wed Mar 23, 2005 12:34 pm
- Location: Peterborough
Re: HELP: Correct LED bulbs for front cab interior light
Hi
I have a couple of festoons waiting to insert into the front interior courtsey lights.
Managed to get the light fitting Off with the squeeze and push to the left technique.
However the lugs holding the plastic light covers appears very tuff how do you release the covers without breaking them. ?
anyone help..
I have a couple of festoons waiting to insert into the front interior courtsey lights.
Managed to get the light fitting Off with the squeeze and push to the left technique.
However the lugs holding the plastic light covers appears very tuff how do you release the covers without breaking them. ?
anyone help..

-
bigdaddycain
- Supreme Being
- Posts: 10637
- Joined: Fri May 13, 2005 11:58 am
- Location: Ince Lancs
Re: HELP: Correct LED bulbs for front cab interior light
If i remember correctly, i used the tip of my ignition key,on the lugs from the back, the cable is folded up into the roof, it can be manipulated out further to give you more room to see...mr and mrs pips wrote:Hi
I have a couple of festoons waiting to insert into the front interior courtsey lights.
Managed to get the light fitting Off with the squeeze and push to the left technique.
However the lugs holding the plastic light covers appears very tuff how do you release the covers without breaking them. ?
anyone help..
Its worth giving the lens a wash too, mine was filthy, don't forget to thoroughly dry it before replacing it though!
ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014




