speedo is out

davylaa · Post by **davylaa** » Sat Aug 23, 2008 3:06 pm

Got the speedo out. Anyone know how to remove the chip. I dont even know what it looks like.
Cheers

Post by **westonwarrior** » Sat Aug 23, 2008 3:23 pm

the chip is wired to the back with 1 wire from the loom going through it

davylaa · Post by **davylaa** » Sat Aug 23, 2008 3:36 pm

Thanks Rob. Do I just cut the wire and take it out?
Cheers Dave

Post by **westonwarrior** » Sat Aug 23, 2008 3:40 pm

the wire to the input i think has been cut and wired into the chip so you need to reconnect that wire and just unscrew the other wires replacing the screws in the unit

the chip should then be free

davylaa · Post by **davylaa** » Sat Aug 23, 2008 3:41 pm

Thanks again Rob

davylaa · Post by **davylaa** » Sat Aug 23, 2008 4:45 pm

westonwarrior wrote:the wire to the input i think has been cut and wired into the chip so you need to reconnect that wire and just unscrew the other wires replacing the screws in the unit

the chip should then be free

All done. Just gotta but faceplate.
Thanks a lot
Dave

speedo is out

speedo is out

Re: speedo is out

Re: speedo is out

Re: speedo is out

Re: speedo is out

Re: speedo is out