mason alarm

You've Been Bongod · Post by **You've Been Bongod** » Mon Mar 22, 2010 8:54 pm

hi all what temp should a mason alarm show on the temp gauge when on a run??

this one sits at about 12 oclock and fluctuates up and down

thanks for any advice

missfixit70 · Post by **missfixit70** » Mon Mar 22, 2010 8:59 pm

sounds like it's doing it's job ok then, I'm sure a v6er will be along to confirm.

You've Been Bongod · Post by **You've Been Bongod** » Mon Mar 22, 2010 9:01 pm

sorry kirsty this is on my diesel bongo

missfixit70 · Post by **missfixit70** » Mon Mar 22, 2010 9:04 pm

Spot on then

Mine hovers around vertical, I can get it to go up to about 3/4 of the way from vertical to the end of the scale while stationary, then the fans kick in & bring it straight back down in about 15 seconds, alarms set to start bipping about hafway between vertical & end of scale.

dobby · Post by **dobby** » Mon Mar 22, 2010 9:10 pm

Ditto Carl

Worst is 1 o/c and set at about 4.5

heatherpetch · Post by **heatherpetch** » Mon Mar 22, 2010 9:29 pm

ours is 1 o/ clock or a tad more if towing and set about 4.5

mikexgough · Post by **mikexgough** » Mon Mar 22, 2010 9:47 pm

that's the norm..... as Kirsty says....mid range and then when it creeps up..... fans in down she comes.....

Mine doesn't creep up as far as some but I have a new radiator..... mines the "default" 4

missfixit70 · Post by **missfixit70** » Tue Mar 23, 2010 12:45 am

This is the fan kick in point on mine

mason alarm

mason alarm

Re: mason alarm

Re: mason alarm

Re: mason alarm

Re: mason alarm

Re: mason alarm

Re: mason alarm

Re: mason alarm