Ladder Fitting

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
soulcake

Ladder Fitting

Post by soulcake » Mon Sep 06, 2010 10:15 pm

Please advise how to remove back handle ???? so that ladder may be fitted.

Sorry if I am asking in the wrong place but I have looked all over and not seen the word 'ladder'.

Catharine Soulcake
User avatar
Northern Bongolow
Supreme Being
Posts: 7722
Joined: Mon Mar 15, 2010 11:33 pm
Location: AKA Vanessa

Re: Ladder Fitting

Post by Northern Bongolow » Tue Sep 07, 2010 3:11 am

if you look at the handle it has 4 plastic covers,one in each corner,get a small screwdiver or similar and GENTLEY try to lift one edge of each one,be careful because one side is attatched to the handle it pivots,the other opposite edge lifts to show the bolts,
keep the handle safe as they are quite expensive,if you need to refit it later.
A1tony

Re: Ladder Fitting

Post by A1tony » Tue Sep 07, 2010 8:26 am

Sorry for the hijack, but where can you get the ladder and do they fit on a facelift tailgate?? Also what sort of price, thanks...
Post Reply

Return to “Techie Stuff”