Rocker cover gasket issue V6

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
fargo

Rocker cover gasket issue V6

Post by fargo » Fri Dec 31, 2010 2:09 pm

Hello and I hope everyone had a happy Christmas and is going to have a happy new year.

I have had fun with the Bongo over Christmas, with one of the spark plug wells on the passenger side filling up with oil and stopping the plug from working, after a panic and a clear out of the plug all are firing again, but it is still weeping oil.

I managed to get new gasket covers for both sides of the engine (for £30 from Lee at Jap Auto Spares - great service!) and it has been to a garage for a quick check, the mechanic said that he found some of the bolts were loose and they have 10p sized rubber bungs at the end of the bolts that he could not get out, because he was pressed for time, he tightened them up and told me to see how we go (we have a 150 mile journey tomorrow, so lots of checking on the way).

Does anyone know about these rubber bungs/washers or whatever they are? I am going to book the bongo into the garage for a change of both rocker cover gaskets when I get home.

Thanks everyone!!
User avatar
missfixit70
Supreme Being
Posts: 12431
Joined: Fri Jun 01, 2007 3:53 pm
Location: weymouth

Re: Rocker cover gasket issue V6

Post by missfixit70 » Fri Dec 31, 2010 3:27 pm

This help? - http://www.lushprojects.com/bongopartsm ... mgno=.html - click on the index on the left for part no's relative to drawing no's.
You can't polish a turd - but you can roll it in glitter.
rita
Supreme Being
Posts: 3286
Joined: Tue Sep 15, 2009 7:11 pm

Re: Rocker cover gasket issue V6

Post by rita » Fri Dec 31, 2010 4:10 pm

missfixit70 wrote:This help? - http://www.lushprojects.com/bongopartsm ... mgno=.html - click on the index on the left for part no's relative to drawing no's.
Hi,
You are probably looking for 10237 WASHER,SEALING-HEAD COVER ..
MountainGoat
Supreme Being
Posts: 3945
Joined: Sat Jan 13, 2007 10:12 pm
Location: Scottish Borders

Re: Rocker cover gasket issue V6

Post by MountainGoat » Fri Dec 31, 2010 4:40 pm

I had the tappets of my 2.5TD done in Edinburgh last month. The cylinder head gasket came complete with the Bolt washer you require, Not sure if they sell these bolt washers separately but they probably do.

Tony

http://www.bongobits.co.uk/Main.asp?Pag ... roduct=246

Jap Auto Solutions also do gaskets for V6's but I don't see any bolt washers so you will have to ask.

http://www.japautosolutions.com/acatalog/info_1087.html
Former SGL5 Owner Jeep Cherokee 2.5CRD Burstner Ixeo Time it585
fargo

Re: Rocker cover gasket issue V6

Post by fargo » Fri Dec 31, 2010 5:46 pm

Thanks everyone, owning a bongo is certainly financially exciting!

Mind you the wife used to have an old VW camper and she says it spent more time in the garage than on the road!

Happy new year!
cheffy34
Supreme Being
Posts: 1369
Joined: Thu Aug 30, 2007 4:17 pm
Location: Planet earth "mostly"

Re: Rocker cover gasket issue V6

Post by cheffy34 » Sat Jan 01, 2011 1:37 am

Sorry don't know have'nt been there yet :) but if it helps my driver side front plug has taken oil for the last three years, don't bother me, quick clean up every so often :!: really hasn't bothered me :!: :!: , bit of bog roll rolled up stuck down there once in a while and hey presto, I doubt it will fill in 150 mile anyway [-o< it has probably been goin on for a while anyway, i nipped mine down tighter and it slowed it down considerably :wink: offcourse there is the other option for the plug filling with oil but i would hope not [-o< , i've said i will do mine but i never do :oops: :roll: when it gets bad enough i will, but i am a tight git i would prob try some instant gasket first but i fear this may not be an option on mine as it would appear that someone has glued it before :roll: .


D
All disclaimers count as i know nothing
BUY A V6er i like my affair with the petrol pump
Locked

Return to “Techie Stuff”