Hi all,
Could any one tell me if 18" RX8 Alloys will fit straight onto a 2000 V6 Aero Bongo.
I have just bought some from a friend as he had a lot of offers for them and had to grab them quick.
Secondly do I have to get better load rating tyres for them too, if so what is your advise.
thank u in advance all feed back is greatly appriciated.....
Mazda RX8 2004 Alloy wheels
Moderators: Doone, westonwarrior
-
janehancox
Re: Mazda RX8 2004 Alloy wheels
many have used the wheels
as i recall it 96 and 98 for the tyre load rating
as i recall it 96 and 98 for the tyre load rating
-
francophile1947
- Supreme Being
- Posts: 11354
- Joined: Mon Dec 18, 2006 6:15 pm
- Location: Norwich
Re: Mazda RX8 2004 Alloy wheels
Minimum load ratings are 92 front and 96 rear. However, as you'll probably fit the same tyres all round, I'd go for a minimum of 96 load rating. Unfortunately, the ratings are harder to get in 18" tyres, but they are about 
John
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
-
steviebongo
- Tribal Elder
- Posts: 815
- Joined: Thu Jan 08, 2009 8:55 pm
- Location: glasgow
Re: Mazda RX8 2004 Alloy wheels
trying to find these tyres with the load rating of 96, any help would be great.
cheers stevie
cheers stevie
-
francophile1947
- Supreme Being
- Posts: 11354
- Joined: Mon Dec 18, 2006 6:15 pm
- Location: Norwich
Re: Mazda RX8 2004 Alloy wheels
It's not that easy with 18" wheels, which is why lots of us went for 17".
You could try here http://www.mytyres.co.uk/start.html - 245/45x18 are a little bigger than standard , but fit OK and there's lots to choose from
You could try here http://www.mytyres.co.uk/start.html - 245/45x18 are a little bigger than standard , but fit OK and there's lots to choose from
John
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)




