What have I done?

Cobra the 1st · Post by **Cobra the 1st** » Sun Apr 10, 2011 7:38 pm

Hello everyone, I'm new to the site and need help. I think that's I've snapped my rear Anti-roll Bar but have limtied to no knowladge regarding this. I have a taken a pic if anyone could confirm or un confirm what I've done and give me an idea of the price I'm looking at I'd be extreamly happy. Thanks

Kris

Post by **westonwarrior** » Sun Apr 10, 2011 7:40 pm

Pic not showing

Cobra the 1st · Post by **Cobra the 1st** » Sun Apr 10, 2011 7:53 pm

Sorry Guys how do I up load a pic?

Post by **westonwarrior** » Sun Apr 10, 2011 8:00 pm

follow the instructions here http://www.igmaynard.co.uk/bongo/forum/ ... =42&t=9285

or if you can uplaod it to a web package just put the link or if all that fails shout and I will pm my e-mail and you can send it me and I will post it

also where abouts are you as local knowledge may help any advice

Cobra the 1st · Post by **Cobra the 1st** » Sun Apr 10, 2011 8:05 pm

Ok I can't figure it out. Basically it looks like a pipe behind the rear wheels, it looks like it's severed and I'm guessing it's the rear anti roll bar. Wish I could show the picture! If it is could anyone tell me how much is new one roughly??

Post by **westonwarrior** » Sun Apr 10, 2011 8:20 pm

OK here is the pic

Itsnot the anti roll bar that sits just in front of the rear axel

mikexgough · Post by **mikexgough** » Sun Apr 10, 2011 8:27 pm

The bar to the rear of the diff is the Lateral rod....

francophile1947 · Post by **francophile1947** » Sun Apr 10, 2011 8:31 pm

The bottom of the shock absorber doesn't look as if it's attached to anything

Post by **westonwarrior** » Sun Apr 10, 2011 8:33 pm

It may be but in lush projects it looks like its attached to the axel in the photo it doesn't

http://www.lushprojects.com/bongopartsm ... 1of02.html

Post by **westonwarrior** » Sun Apr 10, 2011 8:44 pm

I think your right John that does not look good

mikexgough · Post by **mikexgough** » Sun Apr 10, 2011 8:51 pm

This is what it does scroll down and play the flash animation

scanner · Post by **scanner** » Sun Apr 10, 2011 8:52 pm

The broken bit is the "Panhard Rod" which is there to stop the rear axles swing from side to side on corners.

http://en.wikipedia.org/wiki/Panhard_rod

And yes it doesn't look like the nearside shocker is attached as it should be either.

What on earth did you hit?

mikexgough · Post by **mikexgough** » Mon Apr 11, 2011 7:20 am

Some photos......

Nearside -

Offside -

Nope not my Bongo

Also..... Part No S10H28650 Lateral Rod......

I guess one the usual Bongo specialists may have a r=good s/h rod, but before you sort one, I would find out what caused the fracture/bend and if indeed it's connected as per the above photos....

jaylee · Post by **jaylee** » Mon Apr 11, 2011 10:53 am

Like you Kris, i have a limited knowledge of these matters... But like Scanner am quite interested how this damage came about..?

I'm looking at this picture & also thinking possible damage to any bearings..? & could that be brake fluid on the inner wheel rim??

Techies knock me back if i appear to be wrong, I'd check the tire walls too!??? Cant be too careful...

AlliDelta · Post by **AlliDelta** » Mon Apr 11, 2011 1:06 pm

I can probably get you a panhard bar off the Bongo I'm breaking if you want...

What have I done?

What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?

Re: What have I done?