TPS Setting

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
M 80NGO
Supreme Being
Posts: 1913
Joined: Wed Sep 01, 2010 9:24 pm
Location: Usually in My own wibbly wobbly lill world ! Otherwise Huntingdon.

TPS Setting

Post by M 80NGO » Tue Jun 28, 2011 5:00 pm

Hello, do any of you nice people know the correct resistance setting for the throttle position sensor thats located on the top of the fuel pump ?

Thanx, Peter.
Top
User avatar
Alacrity
Tribal Elder
Posts: 634
Joined: Tue Jan 12, 2010 10:02 am
Location: Eastbourne, East Sussex
Contact:
Contact Alacrity

Re: TPS Setting

Post by Alacrity » Tue Jun 28, 2011 5:24 pm

Its not set with resistance it set on the voltage. You have 3 wires, earth, either 12v or 5v (can't remember what the feed voltage is) & a signal wire. Measure between earth & the signal wire (which I think is the middle one, easy to find out though). See HERE
35+ years working with autogearboxes - all day every day......for my sins
Top
M 80NGO
Supreme Being
Posts: 1913
Joined: Wed Sep 01, 2010 9:24 pm
Location: Usually in My own wibbly wobbly lill world ! Otherwise Huntingdon.

Re: TPS Setting

Post by M 80NGO » Tue Jun 28, 2011 9:48 pm

Thats great, thanx =D> :wink: :D
Top
Locked

Return to “Techie Stuff”