Will this work?!

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
bluemeadow

Will this work?!

Post by bluemeadow » Mon Jun 27, 2011 1:19 pm

Hi further to a question I posted on here last week about a compatible electric window switch I havent had any luck with breakers for the ones ones very helpfuly suggested on here but I have found this one on ebay, does anyone know if it will work or could be persuaded to work? Thankyou again x
http://cgi.ebay.com/ebaymotors/ws/eBayI ... OTORS:1123
User avatar
Northern Bongolow
Supreme Being
Posts: 7722
Joined: Mon Mar 15, 2010 11:33 pm
Location: AKA Vanessa

Re: Will this work?!

Post by Northern Bongolow » Mon Jun 27, 2011 3:04 pm

looks very similar but the plugs are different, unless you are able to adapt it may be better to stick with the original.
bluemeadow

Re: Will this work?!

Post by bluemeadow » Wed Jun 29, 2011 10:19 pm

Ok thanku x
jaylee
Supreme Being
Posts: 5500
Joined: Wed Mar 05, 2008 4:56 pm
Location: AQVAE SVLIS

Re: Will this work?!

Post by jaylee » Wed Jun 29, 2011 11:34 pm

My opinion.. Looks close & worth a punt..? May fit your existing Bongo switch plate/trim..? It will need connector modifying.. & if its anything like my 626, the rocker switch at the back (the one that isolates the passenger window) will go live when on...? I used mine as a panic button for total lock-down...

It may bug you that it looks a little different from the passy side too.. If i was in your position i would be 99% sure i could get it to function....!
Cheaper by comparison to a race horse...
Image
Locked

Return to “Techie Stuff”