road wheel nuts torque settings

mentaliss · Post by **mentaliss** » Tue Jul 26, 2011 7:59 pm

Well it says it all above , anyone?
Tah!

wonkanoby · Post by **wonkanoby** » Tue Jul 26, 2011 8:16 pm

http://www.igmaynard.co.uk/bongo/forum/ ... eel+torque

took 30 seconds to search

mentaliss · Post by **mentaliss** » Tue Jul 26, 2011 8:35 pm

wonkanoby wrote:http://www.igmaynard.co.uk/bongo/forum/ ... eel+torque

took 30 seconds to search

Why the attitude? actually most of the posts do not refer correctly to the issue of torque, that is the length and width of the stud and what tensile strength versus load applied.

teenmal · Post by **teenmal** » Wed Jul 27, 2011 8:23 pm

Hi mentaliss,

What type of wheels do you have on your vehicle.

Cheers.

mentaliss · Post by **mentaliss** » Thu Jul 28, 2011 8:27 pm

teenmal wrote:Hi mentaliss,

What type of wheels do you have on your vehicle.

Cheers.

17" flat faced polished alloys came with the bongo import
Tah!

teenmal · Post by **teenmal** » Thu Jul 28, 2011 8:37 pm

mentaliss wrote:
teenmal wrote:Hi mentaliss,

What type of wheels do you have on your vehicle.

Cheers.

17" flat faced polished alloys came with the bongo import
Tah!

Hi I use 120nm/88.5 ft/lbs.Any higher and you have a chance of popping the wheel.

Cheers.

road wheel nuts torque settings

road wheel nuts torque settings

Re: road wheel nuts torque settings

Re: road wheel nuts torque settings

Re: road wheel nuts torque settings

Re: road wheel nuts torque settings

Re: road wheel nuts torque settings