fan motor swap rear to front

[tezzer22]

hi iv been having problems with my front heater fan only working intermittently, then i thought theirs another one in the back that hardly ever gets used , so the question is before i start dismantling the interior are the motors anything alike or totally different ? hope some one out there can answer that one
terry

[wonkanoby]

believe nothing alike

get the faq sheet on the controller as its more likley that

also cleaning the front one of crud helps

[missfixit70]

Just take the front one out, strip it & free up the bearing & brushes that are probably siezed up due to water ingress, check the resistor/control packs, all the necessary links in the FAQ - http://www.igmaynard.co.uk/bongo/forum/ ... 43&t=28727
The rear heater fan is different to the front, I couldn't see an easy way of making it work, although the resistor pack from the rear works in the front for the climate control model (mine's been runnning in there for @2 years) the only difference is the cooling fins on it are 90 degrees out.