ARB drop link question

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
Shaun_E
Bongonaut
Posts: 51
Joined: Sat Aug 21, 2010 5:10 pm
Location: Nr Tadley, Hampshire

Re: ARB drop link question

Post by Shaun_E » Mon Apr 30, 2012 3:11 pm

I finally found time between rain showers to have a proper look yesterday. On pulling the drop link out of the ARB it was obvious that the hole in the ARB has worn - it was slightly ovalised - and that was what was allowing the drop link to move. For now I have put some loctite on the thread and tightened the nut with a breaker bar - hopefully that should get us through this weekend. Longer term I will source a better condition ARB.
Thanks to all for information and suggestions.
Shaun
Top
Post Reply

Return to “Techie Stuff”