I have no flashers

[alan]

seem to have lost all indicator and hazzards light think it might be a fuse but which one plase

[g8dhe]

Bongo Wiring Manuals are on line here http://www.g8dhe.net/bwm/
But the fuses will be;

[alan]

Bongo Wiring Manuals are on line here http://www.g8dhe.net/bwm/
But the fuses will be;

thank you

[jaylee]

Bongo Wiring Manuals are on line here http://www.g8dhe.net/bwm/
But the fuses will be;

The one highlighted is for the hazards... The 10amp red fuse on the row below, 3rd from the left is for the indicators.

[alan]

tryed put new fuse in but there just blowing as i puting them in hlep want next

[Driver+Passengers]

Have you got a multimeter? You may not need one but it might be an easier fix if you do. You can get one <£10 if there's a Maplin nearby or borrow off a neighbour.

[alan]

Have you got a multimeter? You may not need one but it might be an easier fix if you do. You can get one <£10 if there's a Maplin nearby or borrow off a neighbour.

yeh loks like iam going to have to fine one or buy one but do the wires goi thought he door ??????? is it time to have a look at the door loom

[Driver+Passengers]

Have you got a multimeter? You may not need one but it might be an easier fix if you do. You can get one <£10 if there's a Maplin nearby or borrow off a neighbour.

yeh loks like iam going to have to fine one or buy one but do the wires goi thought he door ??????? is it time to have a look at the door loom

I can't imagine why they would.

Which fuse is blowing? Both of those mentioned above? You've probably got a short to ground.

I'm not up to speed with the light clusters, but if you can get the connectors removed from the indicator bulb holders and still blow a fuse, you can discount bulb holders and start looking at the wiring. If you've identified the right connectors, then you can start following whatever exposed wiring there might be.

Just an idea - not the 'right way' to go about diagnosing necessarily, but it's where I'd maybe start if I was faced with the same.

[Hanksy]

seem to have lost all indicator and hazzards light think it might be a fuse but which one plase

make sure you are not blinking at the same rate as the lights

[the laird]

Take all bulbs out ,2 put indicators on and refit bulbs one at a time then see when it blows with which bulb done it,just a quick wy o pinpoint source then check those wires,hope this helps a bit

[jaylee]

Do you have towing electrics fitted??

[alan]

Do you have towing electrics fitted??

yes

[alan]

Do you have towing electrics fitted??

yes

thank you for the pionters truned out to be tow bar wiring all soted cheers