It's a black insulated wire leading from the driver's side AFT motor and disappearing through/under the driver's side AFT hinge. That particular hinge is caked with rust and I'm worried the wire will suffer. If it's an earth, no prob as i can relocate it. If it's a power feed that's a bit more of a problem as I have a rear kitchen which makes access to the control box somewhat tricky.
Thx in advance.
Terry
			
									
									Can you identify a wire for me please?
Moderators: Doone, westonwarrior
Can you identify a wire for me please?
'Enjoy every sandwich'
						- haydn callow
 - Supreme Being
 - Posts: 5777
 - Joined: Mon Jan 08, 2007 9:50 pm
 - Location: Somerset
 - Contact:
 
Re: Can you identify a wire for me please?
It,s very unlikely a black wire would be power.....generally black is earth....but a few continuity tests should soon prove or otherwise.
			
									
									
						Re: Can you identify a wire for me please?
It sounds like its the earth wire that feeds the switches and lights etc. on the inside top of the AFT connector M2-03 pin A;


			
									
									

Geoff
2001 Aero V6, AFT, full side conversion.
						2001 Aero V6, AFT, full side conversion.




