Saw this at the NEC show.

[scanner]

I refill my two R 907s from a larger bottle

That isn't something I would mention on an open forum.

[Bongolia]

Now this is interesting as a competitor to the Propex.
http://www.wallas.fi/index.php?id=47

[Bongolia]

Scanner thanks for pointing that out.
Serious typo there. It should have read: On the gas question I refilled my two R 907s from a larger bottle this made for a significant saving.
I exchanged the bottles every fourth fill so that cost had to be factored in.
However I don`t do this anymore.
I really should pay more attention to my grammar.

[mikeonb4c]

Scanner has started an interesting thread here. The Wallis ceramic cooker sounds promising. Whats the cost i wonder

[scanner]

Scanner has started an interesting thread here. The Wallis ceramic cooker sounds promising. Whats the cost i wonder

It's "Wallas" and the price was mentioned earlier.


?? have you just woke up Mike?

[Bongolia]

Check out the site Mike , they have a really good range of heating and cooking equipment mainly for boats (and barges ) particularly taken with the heater I put the second link to. Quality stuff by the look of it.
The technical bit on their burner system makes an interesting read too.
1600.00 ukp for the heater hob.

[mikeonb4c]

Scanner has started an interesting thread here. The Wallis ceramic cooker sounds promising. Whats the cost i wonder

It's "Wallas" and the price was mentioned earlier.


?? have you just woke up Mike?

Sorry Scanner thought that was the campervan.co.uk model

[vanvliet]

Nice but very expensive! Inlet/ exhaust looks bulky under the van and the unit under the worktop is actually quite large and takes up a fair bit of space
Check out the installation /user videos on Youtube - key in 'Wallas XC DUO - heater and cooker'

[Merlot man]

Now this is interesting as a competitor to the Propex.
http://www.wallas.fi/index.php?id=47

That looks like the perfect job for our small buses !
I wonder could it be fitted in the engine bay and blow the heat out through the rear facing bulk head ?
I wonder where the exhaust has to go IE must it go up ?
Do we have any idea of price ?
Sorry for all the questions
Brian