Hi
Washer motor seems to be working (noisy) fine, but nothing coming out rear pipes. I've disconnected the joint at the tailgate so I know it's not the actual jet. I've tried pulling the 6 inches of pipe out to find the one way valve but it's very tight. I risk pulling the valve out and losing the pipe in the roof space.
I was hoping to get round the one way valve and blast some air through.
Any tips/advice/thoughts?
Rear washer pipe
Moderators: Doone, westonwarrior
-
- Bongonaut
- Posts: 42
- Joined: Sat Oct 28, 2023 9:07 pm
-
- Bongonaut
- Posts: 42
- Joined: Sat Oct 28, 2023 9:07 pm
Re: Rear washer pipe
Investigating further - it's definitely the main length of tune that runs from back of van to front. This seems very difficult to replace so how do I clean it?
I attached a bike pump to the the front end to try to blast some debris to through but nothing. Feels completely blocked.
I attached a bike pump to the the front end to try to blast some debris to through but nothing. Feels completely blocked.
Re: Rear washer pipe
As I recall it runs up the "A" then behind the plastic all down the length of the van best to refer to the diagrams https://www.lushprojects.com/bongoparts ... mgno=.html
Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.