Ignition wiring

Gozzy · Post by **Gozzy** » Thu May 03, 2007 3:12 pm

Anyone know the colours wiring in the ignition wiring loom ??

Need to find the colour of the "On" wire

Gozzy · Post by **Gozzy** » Fri May 04, 2007 9:54 am

Anyone

clogger · Post by **clogger** » Fri May 04, 2007 10:38 am

bit more info may be of help

permenantly on
acc on
ignition fully on

a permenant live i used was at the front of the ignition barrel is a 2 pin connector left hand side wire cannot remember the colour (brown i think)

looking at the 6 pin main ignition connector nearest 3 connectors
bottom i think is ignition on
top is acc on
i got my multimeter out and just played the above is from memory when i put the turbo timer in so cannot remember colours now
but it should help narrow it down

Post by **Simon Jones** » Sat May 05, 2007 8:25 pm

If you just want a feed that is switched on with the ignition, you could use blue & red at the rear of fuse 1 .

Gozzy · Post by **Gozzy** » Sat May 05, 2007 8:40 pm

Sorted

Red/Black