Page 1 of 1
Tappets and compression
Posted: Fri Aug 19, 2011 5:02 pm
by David Edwards
Well folks need a bit of help,lol, anyone know what the tappet clearances are for the inlet and exhaust and what the compressions should be for each cylinder, any help would be greatly appreciated.
Re: Tappets and compression
Posted: Fri Aug 19, 2011 5:08 pm
by missfixit70
Tappets -
http://www.igmaynard.co.uk/bongo/forum/ ... it=tappets
From the manual
"Compression (kg/cmsquared - rpm)
Standard value - 30 - 200
Limit value - 27- 200
Variance limit between cylinders - 3kg/cm squared"
Re: Tappets and compression
Posted: Fri Aug 19, 2011 5:23 pm
by David Edwards
awesome, thanks so much I really appreciate it as do the garage,lol.
Re: Tappets and compression
Posted: Fri Aug 19, 2011 5:27 pm
by missfixit70
Hope it gets it sorted
, compression values are with a warmed up engine (but they should know that
)