Well i went to do the fuel sender wires today and started ripping out the carpet, till i reached the rails for the middle seats. It suddenly dawned on me that this is not as easy a job as i first thought.
Will i have to remove the side panels, trims, seats, belts, rail covers in order to do this. The reason i ask is two fold, firstly obviously to get at the fuel sender and secondly i will soon be embarking on some work that will require me to remove one or more of these panels anyway, maybe i should wait.
Fuel sender cover and carpet
Moderators: Doone, westonwarrior
-
thedogsbollox
- Tribal Elder
- Posts: 867
- Joined: Sun Mar 30, 2008 1:42 am
- Location: South Harrow, Middlesex
Re: Fuel sender cover and carpet
no as carpets split as i recall and just slots around them
for sure never had to remove things to get it out
found a paint scraper handy to retuck under the sides though
for sure never had to remove things to get it out
found a paint scraper handy to retuck under the sides though
-
missfixit70
- Supreme Being
- Posts: 12431
- Joined: Fri Jun 01, 2007 3:53 pm
- Location: weymouth
Re: Fuel sender cover and carpet
Should get away with sliding the plastic covers back on the rails which should then allow the carpet to be lifted, but I think it'll be easier with the seats & that side panel out if you're going to have it out anyway in the near future.
You can't polish a turd - but you can roll it in glitter.
-
thedogsbollox
- Tribal Elder
- Posts: 867
- Joined: Sun Mar 30, 2008 1:42 am
- Location: South Harrow, Middlesex
Re: Fuel sender cover and carpet
Ta, will wait till thenmissfixit70 wrote:Should get away with sliding the plastic covers back on the rails which should then allow the carpet to be lifted, but I think it'll be easier with the seats & that side panel out if you're going to have it out anyway in the near future.