Hello,
Has anybody had experience with using the above products to underseal their Bongo? My two local garages use them rather than Waxoyl and I'm wondering if they're as good.
Cheers
Ross
Underseal - Tectyl (Valvoline) and Tetra Schutz (Tetrosyl)
Moderators: Doone, westonwarrior
- gmaczbongo
- Bongolier
- Posts: 345
- Joined: Mon Dec 14, 2009 6:31 pm
- Location: Fae Dundee
Re: Underseal - Tectyl (Valvoline) and Tetra Schutz (Tetrosyl)
Used the schutz a few times, would use waxoyl every time.
Schutz peels and cracks and the rust grows underneath.
Waxoyl can just be sprayed again and again.
Just keep topping it up.
Schutz peels and cracks and the rust grows underneath.
Waxoyl can just be sprayed again and again.
Just keep topping it up.
Re: Underseal - Tectyl (Valvoline) and Tetra Schutz (Tetrosyl)
Ditto, there was a bit of a discussion on this at Tackeroo yesterday. The dealer/workshop present said they prefer waxoyl - but keep it topped up!
- mikexgough
- Supreme Being
- Posts: 6158
- Joined: Mon Sep 08, 2008 9:02 pm
- Location: Cambridgeshire - where the all the Slodgers reside
- Contact:
Re: Underseal - Tectyl (Valvoline) and Tetra Schutz (Tetrosyl)
Waxoyl and topped up for me too.......... they guys used a shutz gun to coat the majority of the larger part of the undersidde of mine it gave the underside a decent thickness of the stuff then injected the box sections....
Conversant with Bongo Top Pinion Oil Seals
Bongo owning Velotech Cycle Mechanic
Bongo owning Velotech Cycle Mechanic





