V6 Petrol Questions on Exhaust

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
User avatar
apole
Supreme Being
Posts: 1231
Joined: Fri Sep 14, 2007 4:36 pm
Location: Berks

V6 Petrol Questions on Exhaust

Post by apole » Tue Jul 20, 2010 3:44 pm

Hi guys,

Hoping to pick your brains on something.

Recently I've felt my car has had less power at lower revs and also noticed the fuel economy hasn't been so good. Thought it maybe this hot weather but couldn't recall much change in past years.

Anyway, noticed today that my aftermarket back box has a big hole in it on the pipe just before the backbox. Rusted out.

Am I right in thinking this will both change the back pressure and also potentially throw out the mixture? The car seems to have much less power up to about 2200 RPM then without changing the throttle position it will suddenly run better and pick up well.

Also looking at lushprojects, I notice the part number for the backbox is the same for the 2 petrol engines and the diesel. I am presuming this part is the same then which helps me source a replacement quickly?


Thanks in advance.

Andy
Regor

Re: V6 Petrol Questions on Exhaust

Post by Regor » Tue Jul 20, 2010 10:43 pm

Hi Andy,

Hope you are well, and sorry to hear your V6 is a bit poorly.

I've always been taught (and experienced) that a problem with the exhaust system has a significant effect on performance/economy so I reckon that's the case with your car.

What I'm not sure about is the compatability of the 2 litre and diesel back box with the V6 following a recent topic on here. Maybe start to think about going stainless. MIJ Performance in Walsall do off the shelf components for the Bongo and could get it couriered out to you.

Another option, as I recently went totally stainless, I have my old (low mileage, good condition) V6 back box available to you FOC if you can organise to get it from me in Leicestershire.

Best regards
Roger
User avatar
You've Been Bongod
Supreme Being
Posts: 3118
Joined: Sun Feb 11, 2007 8:36 pm
Location: Talke , stoke on trent ,staffs

Re: V6 Petrol Questions on Exhaust

Post by You've Been Bongod » Tue Jul 20, 2010 10:46 pm

you are right in thinkin that it will loose power with exhaust exhausted

what year is your bongo ??
i have a back box for a v6 in good nick as had stainless back box fitted and kept the origional

pm me if interested

you will need a courier as these are heavy
I NOW HAVE AN ASTRA JUST THE BONGO TO FIND A NEW HOME THEN I AM OUT OF HERE
wishmaster
Tribal Elder
Posts: 598
Joined: Sat Mar 14, 2009 8:50 pm
Location: mid glamorgan

Re: V6 Petrol Questions on Exhaust

Post by wishmaster » Wed Jul 21, 2010 11:05 am

When any part of my exhaust 'goes', im going stainless steel straight through :)

Izzy
I have a plan and its as HOT as my pants

IZZY

http://s633.photobucket.com/albums/uu57/izzy2619/
Regor

Re: V6 Petrol Questions on Exhaust

Post by Regor » Wed Jul 21, 2010 11:16 am

I agree Izzy. Really pleased I made the investment and had a full system from manifold to tail-pipe.

Not only is the sound coming out of the sexy twin tailpipes really awesome :P , but 10 extra BHP is claimed which is really useful for performance and economy, especially when towing my caravan =D>

Regards
Roger
User avatar
apole
Supreme Being
Posts: 1231
Joined: Fri Sep 14, 2007 4:36 pm
Location: Berks

Re: V6 Petrol Questions on Exhaust

Post by apole » Wed Jul 21, 2010 2:06 pm

Hi guys,

Thankyou for your support and kind offers. I have had a new tailpipe fitted by Discount trucks this morning as I was afraid the old one could fall off and cause damage. The part number in lushprojects for all bongo types is the same so I'm presuming the tailpipe is the same.

Car runs tons better and is so much quieter which is a relief. The old one was an aftermarket big bore boy racer type that was quite noisy, too noisy in fact as with at least a 2 inch hole in it you didn't realise it had gone !!

I will now be looking at a stainless one cat backwards as the middle section is showing signs that it too will need replacing in the next few months.

In the interim the mild steel one will do fine and at least the car runs alot better and I know nothing should be falling off !!!

Thanks again. Any ideas on the price range for a good quality stainless exhaust, and also can they post it out?

Regards

Andy
Regor

Re: V6 Petrol Questions on Exhaust

Post by Regor » Wed Jul 21, 2010 4:01 pm

H Andy,

Glad you got sorted out for now.

Have a look at the link below, very pleased with the job they did on my Bongo. I think they said they do jig built off the shelf units and can post/courier out.

http://www.mijperformance.com/exhaust-mazda.html

Regards

Roger
cheffy34
Supreme Being
Posts: 1369
Joined: Thu Aug 30, 2007 4:17 pm
Location: Planet earth "mostly"

Re: V6 Petrol Questions on Exhaust

Post by cheffy34 » Wed Jul 21, 2010 4:02 pm

better off taking it your local place andy, get it made on the car, if ya was down by me i could get you a deal :wink: dont let them tell you it more expensive cause it a v6 either andy :wink:


Dar
All disclaimers count as i know nothing
BUY A V6er i like my affair with the petrol pump
Post Reply

Return to “Techie Stuff”