Bongo spare wheel winder

steve alan · Post by **steve alan** » Mon May 23, 2011 8:12 pm

hope there is some tec minded members on here that can help out ,did'nt get a winding pole with my bongo so son,s gonna fab one up for me , not something I can do myself now as recovering from a stroke.
what I would like to know is
1. mesurement from end of main bar to the cross piece?
2. how far cross piece protudes outwards?
finaly how thick is cross piece & how thick is the main bar
thanks in advance
Steven

alant54 · Post by **alant54** » Mon May 23, 2011 8:27 pm

Do you mean that you haven't got the winding pole for the jack.?..it's located in the storage box in the sliding door footwell in two clips at the top......

it does both the jack and spare wheel winder...

missfixit70 · Post by **missfixit70** » Mon May 23, 2011 8:28 pm

Somewhere I'm sure there're drawings to make em up from, but b*ggered if I can find em. Anyone?

Northern Bongolow · Post by **Northern Bongolow** » Mon May 23, 2011 8:31 pm

steve alan wrote:hope there is some tec minded members on here that can help out ,did'nt get a winding pole with my bongo so son,s gonna fab one up for me , not something I can do myself now as recovering from a stroke.
what I would like to know is
1. mesurement from end of main bar to the cross piece?
2. how far cross piece protudes outwards?
finaly how thick is cross piece & how thick is the main bar
thanks in advance
Steven

1 = 5mm.
2 = 10mm long each arm from the outer of the shaft.
each arm is 6mm thick.
main bar is 15mm thick, and total length tip to tip is 750 mm.

alant54 · Post by **alant54** » Mon May 23, 2011 8:40 pm

Dimensions:- Diameter of pole= 15mm
Overall length= 750mm
Cross piece diameter= 5m
Length = 40mm
Cross piece located at 7.5mm centre from end of winding pole
other end of winding pole has two flats to take the handle for the jack

hope this helps

Oh bugger....Ady got there first...

....must type faster...

....

Alan

Northern Bongolow · Post by **Northern Bongolow** » Mon May 23, 2011 9:31 pm

i had mine handy-----------persuading the mrs to make my tea

steve alan · Post by **steve alan** » Mon May 23, 2011 10:12 pm

Northern Bongolow wrote:
steve alan wrote:hope there is some tec minded members on here that can help out ,did'nt get a winding pole with my bongo so son,s gonna fab one up for me , not something I can do myself now as recovering from a stroke.
what I would like to know is
1. mesurement from end of main bar to the cross piece?
2. how far cross piece protudes outwards?
finaly how thick is cross piece & how thick is the main bar
thanks in advance
Steven
1 = 5mm.
2 = 10mm long each arm from the outer of the shaft.
each arm is 6mm thick.
main bar is 15mm thick, and total length tip to tip is 750 mm.

many many thanks

steve alan · Post by **steve alan** » Mon May 23, 2011 10:13 pm

alant54 wrote:Dimensions:- Diameter of pole= 15mm
Overall length= 750mm
Cross piece diameter= 5m
Length = 40mm
Cross piece located at 7.5mm centre from end of winding pole
other end of winding pole has two flats to take the handle for the jack

hope this helps

Oh bugger....Ady got there first... ....must type faster... ....

Alan

many many thanks

daveblueozzie · Post by **daveblueozzie** » Mon May 23, 2011 10:36 pm

Dunno if this helps. you can weld a socket on the end if you don't have the ratchet.

steve alan · Post by **steve alan** » Tue May 24, 2011 12:47 am

daveblueozzie wrote:Dunno if this helps. you can weld a socket on the end if you don't have the ratchet.

brill mesurements in old skool as well just my cup of tea
many thanks

Bongo spare wheel winder

Bongo spare wheel winder

Re: Bongo spare wheel winder

Re: Bongo spare wheel winder

Re: Bongo spare wheel winder

Re: Bongo spare wheel winder

Re: Bongo spare wheel winder

Re: Bongo spare wheel winder

Re: Bongo spare wheel winder

Re: Bongo spare wheel winder

Re: Bongo spare wheel winder