ABS Light on

sotal · Post by **sotal** » Thu Jan 25, 2018 8:07 am

The Kia one certainly looks the closest. The tip of the sensor looks the same, the shape of the mount looks similar. The electrical plug looks the same.

My only concern was that the length of the cylinder sensor part looks shorter on the Kia one (from the mounting plate to the tip) however that might just be perspective. The mounting plate also looks to be thicker.

I seem to recall that Kia used to use a lot of parts / designs from the previous generation of cars as it was a cheap way to build a car. So that would fit in.

Most of the mazda sensors I can find have a plain metal sensor with a smooth flat tip. The bongo one is a black plastic cylinder with a small thin metal rectangle on the end. Which matches the kia Rio one.

cutlass · Post by **cutlass** » Thu Jan 25, 2018 8:56 am

0K31L4373XD - it is photo

high - 19mm resistans - 1.4 kOm

sotal · Post by **sotal** » Thu Jan 25, 2018 11:56 pm

cutlass wrote: Thu Jan 25, 2018 8:56 am 0K31L4373XD - it is photo
high - 19mm resistans - 1.4 kOm

Thanks for that. Where were the specifications from?

The sensor on the Bongo is about 24mm long.

cutlass · Post by **cutlass** » Fri Jan 26, 2018 9:54 am

0K31L4373XD = ERA 560172 http://www.port3.ru/info/ERA/560172

cutlass · Post by **cutlass** » Fri Jan 26, 2018 10:42 am

may be look "universal ABS sensor" from ERA 560052- it long 24.5 mm https://cardone.org/market/catalog/Regu ... ERA-560052

cutlass · Post by **cutlass** » Fri Jan 26, 2018 11:23 am

sotal - look - photo and size https://www.buycarparts.co.uk/abs-sensor/m-facet

Wibbly · Post by **Wibbly** » Thu Feb 20, 2020 2:13 pm

Was there any conclusion on a suitable and cheaper alternate part that would fit and work?

ABS Light on

Re: ABS Light on

Re: ABS Light on

Re: ABS Light on

Re: ABS Light on

Re: ABS Light on

Re: ABS Light on

Re: ABS Light on