Hi the wheel arches are ok i'ts just the start of rust around the rear wheel arches, I thught that maybe fitting plastic inner arches would
help keep the elements away and maybe the rust, at least for a while longer.
Cheers.
Search found 17 matches
- Sun Jun 09, 2013 11:16 pm
- Forum: Pimp My Bongo
- Topic: Plastic wheel arches (inner)
- Replies: 5
- Views: 2473
- Sat Jun 08, 2013 1:58 pm
- Forum: Pimp My Bongo
- Topic: Plastic wheel arches (inner)
- Replies: 5
- Views: 2473
Plastic wheel arches (inner)
Hi Folks, does anybody out there know of any plastic inner wheel arches that would fit or can be addapted to fit the Bongo?
Cheers,
Mike 1324
Cheers,
Mike 1324
- Mon Dec 05, 2011 11:15 am
- Forum: Techie Stuff
- Topic: Heater control not working
- Replies: 4
- Views: 1796
Re: Heater control not working
Many thanks for the information, as I stated the motor is in a sorry state ( the carbon brush springs are broken ) and a new one via Bongo discount parts is £175, can I ask if any of you are you aware of a less expensive outlet for these items?
Regards,
Mike.
Regards,
Mike.
- Sun Dec 04, 2011 5:40 pm
- Forum: Techie Stuff
- Topic: Heater control not working
- Replies: 4
- Views: 1796
Heater control not working
Hi folks, looking for advice regarding the front fan heater which has stopped working, I've taken the fan motor ( which when exposed I was unable to turn ) out, cleaned it, lubricated it and although it lookes in poor condition reinstalled it but to no effect,
having put a voltage meter across the ...
having put a voltage meter across the ...
- Tue Aug 16, 2011 9:34 pm
- Forum: Techie Stuff
- Topic: No 12volt output from Cigar lighters
- Replies: 8
- Views: 2166
Re: No 12volt output from Cigar lighters
Hi Jeff,
The problem turns out to be the fuse like cct on the back of the Cigar lighter as you suggested, thanks for that,
and thanks to all who respoded.
Cheers
Mike.
The problem turns out to be the fuse like cct on the back of the Cigar lighter as you suggested, thanks for that,
and thanks to all who respoded.
Cheers
Mike.
- Mon Aug 15, 2011 10:46 pm
- Forum: Techie Stuff
- Topic: No 12volt output from Cigar lighters
- Replies: 8
- Views: 2166
Re: No 12volt output from Cigar lighters
The ignition is on and I do not have a leisure battery, thanks for the fast reply's I'II check the rear of the cigar lighters.
- Mon Aug 15, 2011 9:46 pm
- Forum: Techie Stuff
- Topic: No 12volt output from Cigar lighters
- Replies: 8
- Views: 2166
No 12volt output from Cigar lighters
After plugging a faulty water pump (not known at the time) into the cigarette lighter ( both of them tried ) both are now
dead i.e no 12v output , I have tested the number 8 15a fuse and it's ok, The Bongo is a 2.5D 1995 model. Looking at the wireing diagram ( I think its the correct one) it appears ...
dead i.e no 12v output , I have tested the number 8 15a fuse and it's ok, The Bongo is a 2.5D 1995 model. Looking at the wireing diagram ( I think its the correct one) it appears ...
- Mon Jul 12, 2010 5:06 pm
- Forum: Techie Stuff
- Topic: Electric Window failure
- Replies: 16
- Views: 4039
Re: Electric Window failure
Thanks folks, It was indeed the wireing loom link between the drivers door and body, all now woking ok.
- Tue Jun 15, 2010 5:18 pm
- Forum: Techie Stuff
- Topic: Electric Window failure
- Replies: 16
- Views: 4039
Electric Window failure
We are unable to open driver or passenger windows, both window switches are inoperable, I have checked fuse 14
and it is ok . I have also checked for 12volts on the drivers door switch without success, can anyone please suggest where the problem may be?
Thanks, Mike.
and it is ok . I have also checked for 12volts on the drivers door switch without success, can anyone please suggest where the problem may be?
Thanks, Mike.
- Fri Feb 19, 2010 9:32 pm
- Forum: Techie Stuff
- Topic: Central Locking
- Replies: 7
- Views: 1824
Central Locking
Hello, our central locking has packed up, would anyone know where it is located ?
Cheers,
Mike.
Cheers,
Mike.
- Wed Jun 04, 2008 6:30 pm
- Forum: Techie Stuff
- Topic: Window not opening
- Replies: 3
- Views: 1443
Re: Window not opening
I could lie but even though i feel like a DH i'ii own up, I never gave that switch a passing thought,
thanks Rob , you've saved me hours of pointless labour.
All the best , Mike
thanks Rob , you've saved me hours of pointless labour.
All the best , Mike
- Wed Jun 04, 2008 5:46 pm
- Forum: Techie Stuff
- Topic: Window not opening
- Replies: 3
- Views: 1443
Window not opening
Hi Folks,
I have removed the door panels ( 2 or 3 times ) to replace the speakers, but now the passenger window will not open
either from the passenger door switch or the drivers switch,the connection in the door appears ok, there is a votage
at the connector inside the door and the drivers window ...
I have removed the door panels ( 2 or 3 times ) to replace the speakers, but now the passenger window will not open
either from the passenger door switch or the drivers switch,the connection in the door appears ok, there is a votage
at the connector inside the door and the drivers window ...
- Tue Jul 10, 2007 9:52 pm
- Forum: Techie Stuff
- Topic: What do I need to put my surf boards on the roof?
- Replies: 4
- Views: 2085
- Mon Jul 09, 2007 11:31 pm
- Forum: Techie Stuff
- Topic: Advise re, Head gasket replacement
- Replies: 12
- Views: 3239
Advise re, Head gasket replacement
Many thanks to you all for your advice and thoughts regarding my oil leak, there is plenty to think about, a presure test is a good start but if Simons bill is about the average i ceartainly will not be going down that road unless i have to.
Best Regards, Mike
Best Regards, Mike
- Sun Jul 08, 2007 10:44 am
- Forum: Techie Stuff
- Topic: Advise re, Head gasket replacement
- Replies: 12
- Views: 3239
Advise re, Head gasket replacement
Greetings, I have an oil leak on the drivers side of the engine , near the front, my local garage ( Birmingham ) are good but not familiar with Bongo's. They have looked at the problem and said the head gasket needs replaceing which will also require the head to be skimmed, but are unable to give me ...